SILVERCUT DISC 900 C FSC (BASE)

The mowing combinations with conditioner ensure high efficiency and low maintenance costs. These mowers are suitable for larger farms and contractors.

GET A QUOTE

FIND A DEALER

SUBSCRIBE TO SIPINFORMER

HYDRO-PNEUMATIC SUSPENSION – HPS

The Hydro-pneumatic Suspension (HPS) of the cutting bar ensures excellent adaptation to terrain in the range of 35° upwards and 15° downwards.

NARROW OR WIDE LINKAGE

The mowing combinations are available with two linkage options. The distance between the cutter bars is 2.06 m at the narrow and 2.80 m at the wide connection.

DIRECT DRIVE

Direct drive to the first disc via a PTO shaft, angle drive and double PTO joint.

LINKAGE WITH HIGHER POSITION OF THE ARM PROTECTION SYSTEM

Connection with a higher position of the arm protection system. This system is separated from the blocks for a partial lift of the cutter bars.

SEQUENTIAL LIFT – SL

Hydraulic stabilisation enables the sequential lift of the cutter bar. The inside of the cutter bar is lifted first, and then the outside of the cutter bar.

CONDITIONER WITH STEEL FINGERS

Flexible steel fingers damage, break, and “shred” the stems, thus allowing fast moisture loss.

ADJUSTABLE CONDITIONING INTENSITY

With the adjustment of conditioning intensity, the pressure of the rollers can be set according to the amount and type of the forage.

SILVERCUT DISC 900 C FSC (BASE)

Working width C

8.55 m

Working width CW

8.95 m

Nr. of discs

Nr. of blades

PTO rotation speed

1000

Weight C

2880 kg

Weight CW

3020 kg

Power req.

140/190

Capacity

12 ha/h

Cutting height

40-70 mm

Windrow width

1.6-3 m

Conditioner type

Finger steel

Disc rotation

in pairs

Transp. width C

2.7 m

Transp. width CW

3.05 m

Transp. height C

4 m

Transp. height CW

4 m

Transp. length

2.2 m

Clearance C

13 cm

Clearance CW

18 cm

SILVERCUT DISC 900 C FSC (BASE)

Blade Change

QCS - Quick Change System

Hydraulic connection

1x single-acting (1SA), 2x double-acting (2DA)

Driveline

Input PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal joint

Suspension

Hydro-pneumatic

Other

Spare blades and safety brass pins, Additional wear skids - central

Disc Drive Safety

DDSS with 4 brass pins

Collision Safety

CSS - Mechanical

Hitch

3-point linkage Cat. II and III

Product title	SILVERCUT DISC 900 C FSC (BASE)	SILVERCUT DISC 900 C RRC (BASE)	SILVERCUT DISC 900 C FPC (BASE)
Working width C	8.55 m	8.69 m	8.55 m
Working width CW	8.95 m	9.09 m	8.95 m
Nr. of discs	16	16	16
Nr. of blades	32	32	32
PTO rotation speed	1000	1000	1000
Weight C	2880 kg	2850 kg	2760 kg
Weight CW	3020 kg	3090 kg	2900 kg
Power req.	140/190	161/220	140/190
Capacity	12 ha/h	12 ha/h	12 ha/h
Cutting height	40-70 mm	40-70 mm	40-70 mm
Windrow width	1.6-3 m	1.6-3 m	1.6-3 m
Conditioner type	Finger steel	Roller rubber	Finger plastic
Disc rotation	in pairs	combined	in pairs
Transp. width C	2.7 m	2.7 m	2.7 m
Transp. width CW	3.05 m	3.05 m	3.05 m
Transp. height C	4 m	4 m	4 m
Transp. height CW	4 m	4 m	4 m
Transp. length	2.2 m	2.2 m	2.2 m
Clearance C	13 cm	13 cm	13 cm
Clearance CW	18 cm	18 cm	18 cm
Blade Change	QCS - Quick Change System	QCS - Quick Change System	QCS - Quick Change System
Hydraulic connection	1x single-acting (1SA), 2x double-acting (2DA)	1x single-acting (1SA), 2x double-acting (2DA)	1x single-acting (1SA), 2x double-acting (2DA)
Driveline	Input PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal joint	Input PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal joint	Input PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal joint
Suspension	Hydro-pneumatic	Hydro-pneumatic	Hydro-pneumatic
Other	Spare blades and safety brass pins, Additional wear skids - central	Spare blades and safety brass pins, Additional wear skids - central	Spare blades and safety brass pins, Additional wear skids - central
Disc Drive Safety	DDSS with 4 brass pins	DDSS with 4 brass pins	DDSS with 4 brass pins
Collision Safety	CSS - Mechanical	CSS - Mechanical	CSS - Mechanical
Hitch	3-point linkage Cat. II and III	3-point linkage Cat. II and III	3-point linkage Cat. II and III