SILVERCUT DISC 900 C (BASE)

The mowing combinations ensure high efficiency and low maintenance costs. These mowers are suitable for larger farms and contractors.

GET A QUOTE

FIND A DEALER

SUBSCRIBE TO SIPINFORMER

HYDRO-PNEUMATIC SUSPENSION – HPS

The Hydro-pneumatic Suspension (HPS) of the cutting bar ensures excellent adaptation to terrain in the range of 35° upwards and 15° downwards.

NARROW OR WIDE LINKAGE

The mowing combinations are available with two linkage options. The distance between the cutter bars is 2.06 m at the narrow and 2.80 m at the wide connection.

LINKAGE WITH HIGHER POSITION OF THE ARM PROTECTION SYSTEM

Connection with a higher position of the arm protection system. This system is separated from the blocks for a partial lift of the cutter bars.

DIRECT DRIVE

Direct drive to the first disc via a PTO shaft, angle drive and double PTO joint.

SEQUENTIAL LIFT – SL

Hydraulic stabilisation enables the sequential lift of the cutter bar. The inside of the cutter bar is lifted first, and then the outside of the cutter bar.

COLLISION SAFETY SYSTEM – CSS

The collision safety system is released immediately in the event of a collision. The position of the hinge enables the cutter bar to move simultaneously backward and upward. Then, the cutter bar automatically returns to the operating position.

TRANSPORT AND STORAGE

Adjustable support legs for storage in a compact transport position on an area of only 3.2 m2.

SILVERCUT DISC 900 C (BASE)

Working width C

8.55 m

Working width CW

8.95 m

Nr. of discs

Nr. of blades

Disc rotation

in pairs

PTO rotation speed

1000

Weight C

2200 kg

Weight CW

2340 kg

Power req.

90/120

Cutting height

40-70 mm

Windrow width

1.8-2.2 m

Transp. width C

2.7 m

Transp. width CW

3.05 m

Capacity

12 ha/h

Transp. height C

4 m

Transp. height CW

4 m

Clearance C

13 cm

Clearance CW

18 cm

SILVERCUT DISC 900 C (BASE)

Blade Change

QCS - Quick Change System

Hydraulic connection

1x single-acting (1SA), 2x double-acting (2DA)

Driveline

Input PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal joint

Suspension

Hydro-pneumatic

Other

Spare blades and safety brass pins, Additional wear skids - central

Disc Drive Safety

DDSS with 4 brass pins

Collision Safety

CSS - Mechanical

Hitch

3-point linkage Cat. II and III

Product title	SILVERCUT DISC 900 C (BASE)	SILVERCUT DISC 1000 C (BASE)
Working width C	8.55 m	9.4 m
Working width CW	8.95 m	9.8 m
Nr. of discs	16	18
Nr. of blades	32	36
Disc rotation	in pairs	in pairs
PTO rotation speed	1000	1000
Weight C	2200 kg	2390 kg
Weight CW	2340 kg	2530 kg
Power req.	90/120	120/160
Cutting height	40-70 mm	40-70 mm
Windrow width	1.8-2.2 m	2.2-2.6 m
Transp. width C	2.7 m	2.7 m
Transp. width CW	3.05 m	3.05 m
Capacity	12 ha/h	14 ha/h
Transp. height C	4 m	4.49 m
Transp. height CW	4 m	4.43 m
Clearance C	13 cm	20 cm
Clearance CW	18 cm	20 cm
Blade Change	QCS - Quick Change System	QCS - Quick Change System
Hydraulic connection	1x single-acting (1SA), 2x double-acting (2DA)	1x single-acting (1SA), 2x double-acting (2DA)
Driveline	Input PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal joint	Input PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal joint
Suspension	Hydro-pneumatic	Hydro-pneumatic
Other	Spare blades and safety brass pins, Additional wear skids - central	Spare blades and safety brass pins, Additional wear skids - central
Disc Drive Safety	DDSS with 4 brass pins	DDSS with 4 brass pins
Collision Safety	CSS - Mechanical	CSS - Mechanical
Hitch	3-point linkage Cat. II and III	3-point linkage Cat. II and III