1. The specially shaped discs, made of 4 mm wear-resistant steel, ensure excellent forage flow and a long lifespan for the components.
  2. In case of overloading, the cutter bar is protected by the DDSS system. It consists of an intermediate flange with three brass pins, which break in the case of an overload, thus preventing damage to other elements. Replacing pins is quick and easy.
  3. The axis of the disk drive system is attached to the cutter bar with a double closed bearing enabling it to withstand higher loads, thus ensuring a long service life of the cutter bar.
  4. The QCS spring holder ensures that the blade retracts if it hits an obstacle. Blade holders are individually replaceable.
  5. The wear skids are made of wear-resistant HARDOX steel. The specially shaped wear skids with a large surface area protect the cutter bar and divert soil and sand under the cutter bar, thus reducing forage contamination.

3 brass pins ensure that work continues unimpeded in the event of a disc overload. Shearing of the brass pins absorbs the force and leaves the cutter bar intact.

The disc rotation towards the centre provides a narrower windrow and represents the optimal solution for downhill mowing on slopes and on extremely steep terrain. Disc rotation speed is 3185 rpm.

Constant ground adaptation ensures even mowing. The result is clean forage and undamaged turf.

GET A QUOTE
FIND A DEALER
SUBSCRIBE TO SIPINFORMER

Rear- mounted side mowers DISC S ALP

DISC 220 S ALP

Working width

2.16 m

Nr. of discs

5

Nr. of blades

10

Weight

502 kg

Power req.

30/40

Capacity

2.5 ha/h

Transp. width

1.32 m

Transp. height

2.55 m

Blade Change

  • QCS - Quick Change System

Hydraulic connection

  • 1x single-acting (1SA)

Other

  • Spare blades and safety brass pins
  • Additional wear skids - central

Driveline

  • Input PTO shaft with free wheel clutch
  • 3 V-belt drive

Suspension

  • Mechanical

Disc Drive Safety

  • DDSS with 3 brass pins

Collision Safety

  • CSS - Mechanical

Hitch

  • 3-point linkage Cat. I and II
More

DISC 260 S ALP

Working width

2.57 m

Nr. of discs

6

Nr. of blades

12

Weight

542 kg

Power req.

38/50

Capacity

3 ha/h

Transp. width

1.32 m

Transp. height

2.96 m

Blade Change

  • QCS - Quick Change System

Hydraulic connection

  • 1x single-acting (1SA)

Other

  • Spare blades and safety brass pins
  • Additional wear skids - central

Driveline

  • Input PTO shaft with free wheel clutch
  • 3 V-belt drive

Suspension

  • Mechanical

Disc Drive Safety

  • DDSS with 3 brass pins

Collision Safety

  • CSS - Mechanical

Hitch

  • 3-point linkage Cat. I and II
More

DISC 300 S ALP

Working width

2.99 m

Nr. of discs

7

Nr. of blades

14

Weight

590 kg

Power req.

45/60

Capacity

3.5 ha/h

Transp. width

1.46 m

Transp. height

3.37 m

Blade Change

  • QCS - Quick Change System

Hydraulic connection

  • 1x single-acting (1SA)

Other

  • Spare blades and safety brass pins
  • Additional wear skids - central

Driveline

  • Input PTO shaft with free wheel clutch
  • 4 V-belt drive

Suspension

  • Mechanical

Disc Drive Safety

  • DDSS with 3 brass pins

Collision Safety

  • CSS - Mechanical

Hitch

  • 3-point linkage Cat. I and II
More

DISC 340 S ALP

Working width

3.4 m

Nr. of discs

8

Nr. of blades

16

Weight

750 kg

Power req.

52/70

Capacity

4 ha/h

Transp. width

1.46 m

Transp. height

3.78 m

Blade Change

  • QCS - Quick Change System

Hydraulic connection

  • 1x single-acting (1SA)

Other

  • Spare blades and safety brass pins
  • Additional wear skids - central

Driveline

  • Input PTO shaft with free wheel clutch
  • 4 V-belt drive

Suspension

  • Mechanical

Disc Drive Safety

  • DDSS with 3 brass pins

Collision Safety

  • CSS - Mechanical

Hitch

  • 3-point linkage Cat. I and II
More

Why SIP?

Take a look

Grassland harvesting

Take a look

Product range

Take a look

Manure spreaders

Take a look

Other categories

BELT RAKES FAVORIT ALP

MANURE SPREADERS ORION

MOWERS

PICK-UP RAKES AIR

ROTARY RAKES STAR

ROTARY TEDDERS SPIDER

SERVICES

Contact SIP. The SIP customer support team provides comprehensive professional support for the use of all our products.

CUSTOMER SUPPORT

Layer 1support@sip.si

CUSTOMER SERVICE

Layer 1service@sip.si

SPARE PARTS

Layer 1parts@sip.si

+386 3 70 38 650

Find a dealer

Find a dealer

Get a Quote

Get a Quote

Subscribe to SIPinformER

Subscribe to SIPinformER

The information provided on the website and in all documents on the website is for information purposes only. We reserve the right to make changes and errors in the information. Please contact your dealer for an official quotation.

Products
Sales
Services
Company
Latest

© 2024 SIP