1. The specially shaped disc, made of 4 mm wear-resistant steel, ensures excellent forage flow and a long lifespan for the components.
  2. In case of overloading, the cutter bar is protected by the DDSS system. It consists of an intermediate flange with four brass pins, which break in the case of an overload, thus preventing damage to other elements. Replacing pins is quick and easy.
  3. The axis of the disk drive system is attached to the cutter bar with a double closed bearing enabling it to withstand higher loads, thus ensuring a long service life of the cutter bar.
  4. The QCS spring holder ensures that the blade retracts if it hits an obstacle. Blade holders are individually replaceable.
  5. The wear skids are made of wear-resistant HARDOX steel. The specially shaped wear skids with a large surface area protect the cutter bar and divert soil and sand under the cutter bar, thus reducing forage contamination.

3 or 4 brass pins ensure that work continues unimpeded in the event of a disc overload. Shearing of the brass pins absorbs the force and leaves the cutter bar intact.

The option of disc rotation is chosen according to the harvesting technology.

The hydro-pneumatic suspension system (HPS) ensures excellent adaptation to the ground and thus a precise cut and clean forage on all terrains and in all conditions. The relief rate can be easily and quickly adjusted before or during mowing.

With conditioning, faster wilting or drying can be achieved, thus preserving nutrients and ensuring better forage quality. The shorter drying time also reduces the risk of bad weather and saves up the harvesting time.

When conditioning with a roller rubber conditioner, the delicate leaves stay on the plant undamaged. This prevents leaf shredding and protein loss and ensures higher nutritional value and forage quality.

GET A QUOTE
FIND A DEALER
SUBSCRIBE TO SIPINFORMER

Trailed Mowing Combination SILVERCUT DISC HD T

SILVERCUT DISC HD 1500 T (BASE)

Working width

14.55 m

Nr. of discs

32

Nr. of blades

64

Weight

8700 kg

Power req.

206/280

Capacity

22.5 ha/h

Transp. width

2.99 m

Transp. height

3.99 m

Blade Change

  • QCS - Quick Change System

Hydraulic connection

  • 2x double-acting (2DA)
  • 1x Load Sensing (LS)

Other

  • Central lubrication
  • Electric-hydraulic steering axle
  • Spare blades and safety brass pins
  • Additional wear skids - central

Driveline

  • Input PTO shaft with slip and free wheel clutch
  • Angle drive
  • PTO shafts
  • Double universal joint

Suspension

  • Hydro-pneumatic

Disc Drive Safety

  • DDSS with 4 brass pins

Collision Safety

  • CSS - Hydraulic

Hitch

  • Drawbar with ball hitch K80
More

SILVERCUT DISC HD 1500 T FP (BASE)

Working width

14.55 m

Nr. of discs

32

Nr. of blades

64

Weight

10020 kg

Power req.

257/350

Capacity

22.5 ha/h

Transp. width

2.99 m

Transp. height

3.99 m

Blade Change

  • QCS - Quick Change System

Hydraulic connection

  • 2x double-acting (2DA)
  • 1x Load Sensing (LS)

Other

  • Central lubrication
  • Electric-hydraulic steering axle
  • Spare blades and safety brass pins
  • Additional wear skids - central

Driveline

  • Input PTO shaft with slip and free wheel clutch
  • Angle drive
  • PTO shafts
  • Double universal joint

Suspension

  • Hydro-pneumatic

Disc Drive Safety

  • DDSS with 4 brass pins

Collision Safety

  • CSS - Hydraulic

Hitch

  • Drawbar with ball hitch K80
More

SILVERCUT DISC HD 1500 T FS (BASE)

Working width

14.55 m

Nr. of discs

32

Nr. of blades

64

Weight

10260 kg

Power req.

257/300

Capacity

22.5 ha/h

Transp. width

2.99 m

Transp. height

3.99 m

Blade Change

  • QCS - Quick Change System

Hydraulic connection

  • 1x Load Sensing (LS)
  • 2x double-acting (2DA)

Other

  • Central lubrication
  • Electric-hydraulic steering axle
  • Spare blades and safety brass pins
  • Additional wear skids - central

Driveline

  • Input PTO shaft with slip and free wheel clutch
  • Angle drive
  • PTO shafts
  • Double universal joint

Suspension

  • Hydro-pneumatic

Disc Drive Safety

  • DDSS with 4 brass pins

Collision Safety

  • CSS - Hydraulic

Hitch

  • Drawbar with ball hitch K80
More

SILVERCUT DISC HD 1500 T RR (BASE)

Working width

14.69 m

Nr. of discs

32

Nr. of blades

64

Weight

10308 kg

Power req.

257/350

Capacity

22.5 ha/h

Transp. width

2.99 m

Transp. height

3.99 m

Blade Change

  • QCS - Quick Change System

Hydraulic connection

  • 2x double-acting (2DA)
  • 1x Load Sensing (LS)

Other

  • Central lubrication
  • Electric-hydraulic steering axle
  • Spare blades and safety brass pins
  • Additional wear skids - central

Driveline

  • Input PTO shaft with slip and free wheel clutch
  • Angle drive
  • PTO shafts
  • Double universal joint

Suspension

  • Hydro-pneumatic

Disc Drive Safety

  • DDSS with 4 brass pins

Collision Safety

  • CSS - Hydraulic

Hitch

  • Drawbar with ball hitch K80
More

Why SIP?

Take a look

Grassland harvesting

Take a look

Product range

Take a look

Manure spreaders

Take a look

Other categories

BELT RAKES FAVORIT ALP

MANURE SPREADERS ORION

MOWERS

PICK-UP RAKES AIR

ROTARY RAKES STAR

ROTARY TEDDERS SPIDER

SERVICES

Contact SIP. The SIP customer support team provides comprehensive professional support for the use of all our products.

CUSTOMER SUPPORT

Layer 1support@sip.si

CUSTOMER SERVICE

Layer 1service@sip.si

SPARE PARTS

Layer 1parts@sip.si

+386 3 70 38 650

Find a dealer

Find a dealer

Get a Quote

Get a Quote

Subscribe to SIPinformER

Subscribe to SIPinformER

The information provided on the website and in all documents on the website is for information purposes only. We reserve the right to make changes and errors in the information. Please contact your dealer for an official quotation.

Products
Sales
Services
Company
Latest

© 2024 SIP